EASY INSTALLATION: 3 STEPS

WHAT TO EXPECT
THE 3 MAIN STEPS.

STEP 1

PREPARE!

REMOVE THE CURRENT TOILET SEAT
Find the bolt caps at the back of the seat and open them if they’re closed.  
                  
Next, firmly grip the nut that is  fastened to the end of the bolt and begin turning the bolt counterclockwise to unfasten the seat. In some cases, if the nut has wings, you can turn the nut while holding down the bolt. Depending on your toilet seat, you may need to use a phillips screwdriver and a wrench.

CHECK FOR MISSING PARTS
To ensure your installation is worry-free, please make sure you have all the necessary parts from the factory by referencing the parts list. Set each part aside so you can easily access them during installation.

Step1-2.png
Step1-1.png

STEP 2

INSTALL!

THE POSITIONING BRACKET MUST BE INSTALLED PROPERLY

Before installing the Barumi Electric Bidet toilet seat, it is imperative the positioning bracket is installed first AND properly. If this bracket is not positioned and installed properly, your Barumi Electric Bidet will not be properly aligned with your toilet.

Step2-1.png
Step2-2.png

STEP 3

CONNECT!

CONNECT TO YOUR BATHROOM OUTLET (BEST OPTION)

If your bathroom is equipped with a grounded electrical outlet (GFCI), plug your power cord into it to turn the bidet on.


OUTLET NOT AVAILABLE

If your bathroom is not equipped with a grounded electrical outlet, an extension cord may be used to connect the power cord to a GFCI outlet. Please use a grounded extension cord.

Step3-1.png